Install An Sd Card (Optional) - Axis Q8685-LE Installationsanleitung

AXIS Q8685-LE PTZ Network Camera
1. Go to the product's web page.
2. Go to Settings > System > Accessories.
3. For Illuminator > IL1 type:
— Select IR if you connected an infrared illuminator
— Select White for a white light illuminator
4. Repeat the above step for lluminator > IL2 type.

Install an SD card (optional)

A standard or high capacity SD card (not included) can be used to store recordings locally in the
product. See Specifications on page 47 before installing the SD card.
1. Disconnect power from the product.
2. Remove the four top cover screws and remove the top cover.
3. Insert an SD card into the SD card slot, see Hardware overview on page 16 .
4. Replace the top cover and tighten the screws (torque 3.0 Nm).
5. Re-connect power to the product.
44