Axis Q8685-LE Installationsanleitung Seite 35

CAUTION
This installation requires two persons.
1. Tilt the bottom cover backward to its end position and loosen the two front captive
screws of the positioning unit (T20).
2. Tilt the bottom cover forward to its end position and loosen the two rear captive screws
of the positioning unit (T20).
NO NO TICE NO TICE TICE
To reach the positioning unit screws, use a screwdriver with a long enough blade (see
picture above).
AXIS Q8685-LE PTZ Network Camera
35
EN