Camera Installation - AIPTEK Scancam Flex Installationsanweisung

English
Contents Checklist
1.Scan Cam
2.Application / Driver CD
3.USB Cable
NOTE: If you are missing any of these contents please inform your dealer or your nearest support office
so that the contents can be replaced.

Camera Installation

Thank you for purchasing the ScanCam. This guide will walk you through the steps on how to install
your ScanCam onto your computer system.
***Note*** ScanCam works with Windows 98/2000 only.
Before you begin, please make sure your computer is turned off.
Hardware Installation
For the fastest and easiest installation of your ScanCam, we suggest NOT to connect your USB
camera until prompted to do so by the ScanCam Manger driver installation.