Operation As An Access Point (Ap) - Hama 00062735 Bedienungsanleitung

Select AP Bridge-Point to Point (3.2.1.2) if you want to connect this access point wirelessly to a second
access point. In this mode, clients cannot log-in via a wireless connection.
Select AP Bridge-Point to Multi-Point (3.2.1.3) if you want to connect this access point wirelessly to several
other access points. In this mode, clients cannot log-in via a wireless connection.
Select AP Bridge WDS (3.2.1.4), if you want to connect this access point to one or more other access points
wirelessly and clients are to be allowed to log in wirelessly.
Continue configuration as required.

3.2.1.1 Operation as an Access Point (AP)

Selecting this under Band allows you
to specify whether the device runs
ion the 2.4 Ghz band in accordance
with the 802.11b (11Mbps), 802.11g
(54Mbps) standards or works in
combination with 802.11b and 802.11g.
Then set the ESSID. The ESSID can
contain up to 32 characters and must
be identical for all devices in the
network. Channel Number allows you
to select the channel in which the
data is to be transferred. 13 channels
are available.
Example of an ESSID : "WLAN_Router_54Mbps"
Click Apply to save your settings!
To set the encryption for your wireless network, click Continue in the next window and then Security Settings
in the menu on the left. Continue reading on page 09 for instructions on setting Wireless LAN encryption.
Click Apply in the next window if you want to operate a wireless network without encryption.
The router is then restarted. The wireless network is available after you restart.
7