Tools; Configuration Tools - Hama 00062735 Bedienungsanleitung

LAN IP: The router is preset to the
IP address 192.168.2.1. If you want to
use a different address for the router,
you can change it in this entry field.
The corresponding Subnet Mask is
entered in the field directly below this.
DHCP Server:
The integrated DHCP server allows
IP addresses to be assigned to
connected clients automatically.
Select Disabled if you assign the
IP addresses manually in your
network, and therefore do not need a
DHCP server. Select Enabled if you
want to use the DHCP server the
Lease Time setting specifies how
long the assigned IP address is to apply for the client.
The IP address range from which the DHCP server can assign IP address to the clients is restricted by the
Start-IP Address and the End-IP Address. The table below allows you to permanently assign a certain MAC
address to an IP address from the valid range. When the client logs in on the router, it is always given this
IP address. To do so, select Enable Static DHCP Lease and enter the MAC address and the IP address in the
empty fields of the table at the bottom.. The entry is saved in the table when you click Add.
Click Apply to confirm your entries. You must then restart the router for the settings to take effect. To do so,
click Apply in the next window.
Warning! The new LAN configuration is valid after restarting. Therefore, you have to use the new
IP address to open the web interface in the browser.

4. Tools

The Hama Wireless LAN router provides you with various tools to help you configure and use the device.
4.1 Configuration Tools
From the start view which can be accessed
by clicking Home, select Tools in the menu
at the top right, and then Configuration Tools
in the menu on the left.
This page allows you to save all
configuration options of the router. Click
Save to do so. Then select the target
folder. You should also set a file name
which allows you to identify the file
clearly. Click Save after your selection.
The settings are now saved. If you want
14