Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3.2.1.2 Operation as an AP Bridge Point to Point
Selecting this under Band allows you
to specify whether the device runs ion
the 2.4 Ghz band in accordance with
the 802.11b (11Mbps), 802.11g
(54Mbps) standards or works in
combination with 802.11b and 802.11g.
Channel Number allows you to select
the channel in which the data is to be
transferred. 13 channels are available.
Enter the address of the access point
to which the bridge connection is to be
made in MAC address 1. To set the
encryption for your wireless network,
click the Set Security button.
Continue reading on page 11 for instructions on setting Wireless LAN encryption.
Click Apply in the next window, and again in the window after that if you want to operate a wireless network
without encryption. The router is then restarted. The wireless network is available after you restart.
3.2.1.3 Operation as an AP Bridge Point to Multi-Point
The difference to the AP Bridge Point to
Point operation is that you can enter the
MAC addresses of several access points in
this mode. Bridge connections can be
established to a maximum of 6 other access
points. Selecting this under Band allows
you to specify whether the device runs ion
the 2.4 Ghz band in accordance with the
802.11b (11Mbps), 802.11g (54Mbps)
standards or works in combination with
802.11b and 802.11g. Channel Number allows
you to select the channel in which the data
is to be transferred. 13 channels are
available. Enter the addresses of the
access points to which the bridge
connection is to be made in MAC address
1 to MAC address 6.
To set the encryption for your wireless network, click the Set Security button.
Continue reading on page 11 for instructions on setting Wireless LAN encryption.
Click Apply in the next window, and again in the window after that if you want to operate a wireless network
without encryption. The router is then restarted. The wireless network is available after you restart.
8
Werbung
Kapitel
Inhaltsverzeichnis
