About This Operating Manual; Layout Of Warning Notices; Safety; Intended Use - flamco WMS 2-1 Montage- Und Betriebsanleitung, Originalbetriebsanleitung

1. About this operating manual

This manual is part of the product.
f Read this manual before using the product.
Keep this manual during the product's service life, and keep it at hand for future
f
reference.
Pass on the operating manual to any subsequent owner or user of the product.
f
1.1

Layout of warning notices

Warning word This indicates the type and source of danger.
This indicates measures for avoiding the danger.
f
Warning instructions exist in three stages:
Warning word Explanation
DANGER Imminent danger!
Failure to observe will result in death or serious injury.
WARNING Potential imminent danger!
Failure to observe may result in death or serious injury.
CAUTION Dangerous situation!
Failure to observe so may result in minor or moderate injury, or
damage to property.

2. Safety

2.1

Intended use

The low water level protection system (WMS) is exclusively designed for monitoring water
levels in heating systems according to EN 12828. Low water levels (lack of water) are
detected and reported. Any other use is unintended.
2.2

Foreseeable misuse

The low water level protection system (WMS) must not be used in the following cases:
• Water temperature above 120 °C
• Water pressure above 10 bar
• Welding work on the sensor
• Areas with a risk of explosion
In case of operation in areas with a risk of explosion, sparks can cause explosions, fires or
explosions.
3