TP-Link CAP300 Installationsanleitung Seite 10

English
Hardware Installation
The Access Point can be pole-mounted or wall-mounted.
Option1 ： Pole Mounting
■
1
Loosen and completely remove the end of
the metal strap by turning the captive screw
counterclockwise with a flathead screwdriver.
2
Lead the end of the metal strap through the
back of the Access Point.
3
Position the Access Point and wrap the metal
strap around the pole. Feed the end back
through the screw-block and turn the screw
clockwise to tighten the metal strap using a
flathead screwdriver until the Access Point is
secure.
4
Connect the antennas to the Access Point.
7