Main Function; Installation; Parts List - Lacor 69132 Gebrauchs- Und Instandhaltungsanleitung

2.- Do not place anything on top of the slicer; doing so could damage slicer or subject
personnel to possible injury.
3.- When setting up the unit for operation, make sure power to the unit is off. Failure to do so
could result in personal injury.
4.- Unit is not weatherproof. For safe and proper operation locate the unit indoors where the
ambient air temperature is a minimum of 70ºF (21ºC) and a maximum of 85ºF (29ºC).
5.- Do not locate the slicer in an area subject to excessive temperature or grease from
grills, fryers, etc. Excessive temperature could cause damage to the unit.
6.- Do not place slicer in an area that restrict air flow around the front or rear of the unit.
Do not obstruct the ventilator's air outflow located at the back. Excessive heating may
cause irreversible damage to the plaque.
7.- Some exterior surfaces on the unit will get hot. Use caution when touching these areas to
avoid injury.
For heating frying pans and other cooking items using an electrical induction system. Only rec-
ommended for professional use.
UNPACKING
1.- Open the large box. Remove all packing materials and protective covering from the unit and
parts. Do not discard the wrapping until you have checked that the blender is working
correctly.
ON/OFF button
TEMP/HEATING
Down button
Up button
TIMER button

MAIN FUNCTION

INSTALLATION

PARTS LIST

23