Specification; Worthy Information; Warranty Information - Lacor 69132 Gebrauchs- Und Instandhaltungsanleitung

MODEL :
VOLTAGE:
POWER:
WEIGHT:
MEASUREMENT:
POWER LEVELS:
TEMPERATURE LEVELS:

Warranty Information

This manual provides the installation, safety and operating instructions for the Electric slicer. We
recommend all installation, operating and safety instructions appearing in this manual to be read
before installation or operation.
Electric slicer is a product of extensive research and field testing. The materials used were
selected for maximum durability, attractive appearance and optimum performance. Every unit is
thoroughly inspected and tested before shipment.
IMPORTANT!
If the unit changes ownership, be sure this manual accompanies the equipment.
1.- Plug slicer into a properly grounded electrical outlet of the correct voltage, size, and plug
configuration. If the plug and receptacle do not match, contact a qualified electrician to
determine the proper voltage and size, and install the proper electrical outlet.
2.- To avoid any injury, turn the power switch off, unplug the unit from the power source and
allow to cool before performing any maintenance.
3.- For safe and proper operation, the unit must be located at a reasonable distance from
combustible walls and materials.
4.- Allow a minimum of 30 cm clearance along the sides to endure proper operation and safety.
1.- Locate the unit at the proper counter height, in an area that is convenient for use. The
location should be level to prevent the unit or its contents from accidentally falling, and
strong enough to support the weight of the unit.

SPECIFICATION

69132
230V/50Hz
3500W
6.8 Kgr
34x44x13 cms.
13
(0.5-0.8-1.0-1.3-1.5-1.8-2.0-2.3-2.5-2.7-2.9-3.1-3.5 Kw)
42 (de 35ºC a 240ºC cada 5º C)

WORTHY INFORMATION

Keep these instructions for future reference.
WARNING
CAUTIONS
22