Maintenance - aidapt Bewl VB502 Aufbau- Und Wartungs-Anleitung

APERTURE COVER
When transferring to and from the Bewl Shower Chair be careful not to apply weight to the grey
removable toileting aperture cover. This may cause the padded aperture cover to push through.
NB. The padded aperture cover is not designed to be load bearing.
CLEANING
A useful guide to decontamination is MHRA leaflet DB2003(06).
Do not use abrasive cleaners as this could damage the surface of the equipment. For cleaning, wipe with
a clean cloth soaked in detergent solution and wring out. Depending on the detergent manufacturer's
instructions the solution may be heated.
Wipe all surfaces of the equipment and the cloth should be re-immersed periodically and the detergent
changed frequently. The detergent should be rinsed or wiped off using a clean cloth immersed in clean
water and wrung out.
To disinfect make sure the equipment has been cleaned and dried and then wipe over with a clean cloth
and a compatible liquid disinfectant. After disinfecting clean with clean water and dry.
When using detergent or disinfectants then please refer to manufacturers' instructions and if unsure
then consult your local Infection Control Specialist for advice.
This product is not suitable for cleaning with moist heat or autoclaving.
REISSUE
If you reissue or are about to reissue this product, please thoroughly check all components for their
safety, also check all upholstery for security, splits, etc. If in any doubt, please do not issue or use, but
immediately contact your supplier for service support.
When reissuing, a risk assessment may be required as to the suitability of the chair for a particular user.

MAINTENANCE

Please make a safety check of the product at regular intervals or if you have any concerns, paying
particular attention to the castors.
Aidapt Bathrooms Ltd, Lancots Lane, Sutton Oak, St Helens, WA9 3EX
Telephone: +44 (0) 1744 745 020 | Fax: +44 (0) 1744 745 001 | Web: www.aidapt.co.uk
Email: accounts@aidapt.co.uk | adaptations@aidapt.co.uk | sales@aidapt.co.uk
Assembly and Operating Instructions Ver. 6 05/2014 (1261)
4