Dmx Linking; Starting Address - Chauvet Hemisphere 5.1 Schnellanleitung

EN

DMX Linking

Starting Address

Master/Slave
Connection
DMX Values
5-CH
Channel Function
The Hemisphere™ 5.1 can work with a DMX controller when linked by
DMX serial connections. Instructions for connecting and configuring this
product for DMX operation are in the User Manual. If you are not familiar
with DMX, download the DMX Primer from www.chauvetlighting.com.
To ensure full access to all channels in each DMX mode, the highest
recommended DMX address is 508.
The Hemisphere™ 5.1 uses the DMX data connection for its Master/Slave
mode. Instructions for connecting and configuring this product for
Master/Slave operation are in the User Manual.
1 Auto Programs
2 Strobe
Auto Program
3
Speed
4 Rotation
5 Dimmer
Value Percent/Setting
000  009 Blackout
010  019 Red
020  029 Green
030  039 Blue
040  049 White
050  059 Amber
060  069 Red/Green
070  079 Red/Blue
080  089 Red/White
090  099 Red/Amber
100  109 Green/Blue
110  119 Green/White
120  129 Green/Amber
130  139 Blue/White
140  149 Blue/Amber
150  159 White/Amber
160  169 Red/Green/Blue
170  179 Red/Green/Blue/White
180  189 Red/Green/Blue/Amber
190  199 Red/Green/Blue/White/Amber
200  229 Auto Program
230  255 Sound Active Mode
000  255 No function
000  255 Strobe (0~13 Hz)
000  255 No function
000  255 0~100%
000  255 Stop
000  255 Rotate left (slow to fast)
000  255 Stop
000  255 Rotate right (slow to fast)
000  255 0~100%
5
Hemisphere™ 5.1 QRG