Technical Data - Philips AZ7372 Bedienungsanleitung

Recharging of Philips battery pack on board
The battery pack will be recharged if the mains adapter is connected, the set is
switched off and you press the STOP 9 button.
Display indication during charging: CHARGE and
y y
Approx. charging time: 5.5 hours.
Display indication if fully charged: FULL and
y y
Notes:
- When using rechargeable batteries, we advise the use of the Philips battery pack
only, as conventional separate Nickel-Cadmium batteries cannot be recharged on
board.
- To ensure a long life for your battery pack, charging will automatically be
interrupted at high ambient temperatures (Display indication: HOt).

TECHNICAL DATA

Frequency range .......................................................................................20 - 20000 Hz
Signal-to-noise ratio ....................................................................................typ. 95 dBA
Channel separation ......................................................................................typ. 70 dBA
Total harmonic distortion .............................................................................typ. 0.05 %
Conversion...............................................................................Bitstream D/A Converter
Batteries........................................................................2 x 1.5 V, type AA / LR6 / UM3
Dimensions (w x h x d).................................................................134 x 30.5 x 154 mm
Weight (without/with batteries) ..................................................approx. 250/290 gms
CONNECTIONS
11