Philips AZ7372 Bedienungsanleitung Seite 16

OPERATION
ESA – Electronic Shock Absorption Memory
• Activate the ESA memory by sliding the
ESA switch to the right.
The ESA symbol lights up in the display.
y y
The ESA memory continuously stores in advance the
y y
CD data to be played. This is to prevent sound skipping
during play due to shock and vibration.
Prolonged shocks and vibrations may empty the ESA
y y
memory completely. Then the display shows SORRY
and there will be no sound.
Note: When switching the ESA feature on and off, CD play will be delayed or
interrupted for a short time.
RESUME / HOLD
RESUME – playing from where you have stopped
• Activate the RESUME feature by sliding the RESUME/HOLD
switch to the middle.
• If you stop CD play by pressing the STOP 9 button, the last
played position will be stored.
• Press 2; to resume CD play from the position where it
was stopped.
HOLD – deactivating all buttons
• Activate the HOLD feature by sliding the RESUME/HOLD switch to the far right.
Now all buttons are deactivated and will not function until you switch the
y y
feature off again. If you press a button (except OPEN), the display will indicate
HOLD.
Notes:
-In the hold position, the resume function is automatically activated.
-Do not open the lid as this erases the information about the last position played.
16