Samsung HW-K850 Bedienungsanleitung Seite 20

CONNECTIONS
3. Press and hold the VOL button on the remote control for at least 5 seconds with the Soundbar turned off (off).
4. The ID SeT message appears on the display of the Soundbar for a short period of time, and then disappears.
5. When the blue indicator on the subwoofer blinks, turn on the power by pressing
main unit or on the remote control.
6. When the connection is successfully established, the blue indicator on the rear of the subwoofer turn on without
blinking.
● If the connection process fails, the blue indicators will flash continuously. Go to Step 1 and start again.
LeD inDiCatOr LaMP StatUS On SUBWOOfer
LeD Status
red
Blue
Blinking
red and blue Blinking
iD Set
Description
Standby (with the Soundbar main
unit turned off)
on
Connection failed
Successfully connected
on
(normal operation)
Standby (with the Soundbar main
unit turned off)
Connection failed
malfunction
right Side of the Soundbar
Check the power supply to the
(refer to the instructions on manual
connection in the user manual)
Check the power supply to the
(refer to the instructions on manual
connection in the user manual)
Contact the service centre.
20
button on the right side of the
resolution
Soundbar main unit
Connect again
-
Soundbar main unit
Connect again