Installation - Siemens sitrans LR460 Schnellstartanleitung

Approvals (verify against device nameplate)
Hazardous areas
General
Radio

Installation

WARNING: SITRANS LR460 is to be used only in the manner outlined in this
manual, otherwise protection provided by the equipment may be impaired.
Installation shall only be performed by qualified personnel and in
accordance with local governing regulations.
Notes:
• For European Union and member countries, installation must be according to ETSI EN
302372.
• Refer to device nameplate for approval information.
• Use appropriate conduit and conduit fittings or cable glands, to maintain IP or NEMA
rating.
• Observe maximum permissible ambient and process temperatures.
• For US and Canadian installations, see FCC and IC Conformity on page 2.
Mounting location
Notes:
• Provide easy access for viewing the display and programming via the handheld
programmer.
• Provide an environment suitable to the housing rating and materials of construction.
• Provide a sun shield if the device is mounted in direct sunlight.
Page EN-4
FM/CSA: Class II, Div. 1, Groups E, F, and G, Class III
ATEX II 1 D, 1/2 D, 2D Ex tD A20 IP67 T85 °C
CSAUS/C, FM, CE, C-Tick
FCC, Industry Canada, European Radio (R&TTE), C-Tick
SITRANS LR460 – QUICK START MANUAL 7ML19985QW82