Status Leds; Initial Operation; Remote Control - Duravit SensoWash Slim Bedienungsanleitung

then basic functions can also be switched on or off from the side
control buttons.
> Press the lock of the "Battery Compartment"
> Insert two lithium batteries (CR2032) with + facing upwards.
> Close the "Battery Compartment"
EN

4.2 Status LEDs

Red illuminated: SensoWash
Green illumina-
ted:
Green flashing:
Orange flashing: SensoWash
Red flashing:

5. Initial operation

Remote control

> Press the lock of the "Battery Compartment"
> Remove the foil safety tag in the battery compartment.
> Close the "Battery Compartment"
32
®
is in the „Standby mode", all func-
tions cannot be used.
®
SensoWash is in the „On mode", all functions
can be used.
SensoWash ® is in the „Initialization" process,
only „Power"
A
®
is in the „Internal drainage mode".
Malfunction. Disconnect main power supply
and proceed with chapter 9.
8
.
8
on the seat unit can work.
8
.
8
to open it.
to open it.