Standby Mode (Only Battery Version); Retrieving Settings; Retrieving The Activation Status (F2); Retrieving The Flush Duration Per Flush (F1)/ Flush Packages Per Hygiene Flush (F3)/Interval Time (F4) - Duravit DuraSystem Bedienungsanleitung

6.2 Standby mode (only battery version)

In order to increase the service level of the battery, the battery version of the hygiene
flush has a standby mode to which the system switches 10 sec. after the membrane
keypad is last used.
> Press the "+" button.
The membrane keypad is activated. The status LED flashes and shows the current
battery level.
LED flashes 5 times: Battery is sufficiently charged
LED flashes twice: Battery must be replaced

6.3 Retrieving settings

Retrieving the activation status (F2)

You can retrieve the activation status (F2) of the hygiene flush (see table 1: Hygiene
flush).
> Press the F2 button once to retrieve the activation status.
The status LED flashes and shows the current activation status.
LED flashes once: Hygiene flush is deactivated.
LED flashes twice: Hygiene flush is activated.
Retrieving the flush duration per flush (F1)/flush packages per hygiene flush (F3)/
interval time (F4)
You can retrieve the set flush duration per flush (F1), the number of flush packages
per hygiene flush (F3) and the interval time (F4) (see table 1: Hygiene flush).
> Press the F1 button once to retrieve the flushing duration per flush.
The status LED flashes on the membrane keypad according to the steps that are set.
> Press the F3 button once to retrieve the flush packages per hygiene flush.
The status LED flashes on the membrane keypad according to the steps that are set.
> Press the F4 button once to retrieve the interval time.
The status LED flashes on the membrane keypad according to the steps that are set.
If the status LED flashes 5 times after pressing the F1 button (flush duration per
flush), the flush duration is set to approx. 5 sec. per flush. If the status LED flashes 5
times after pressing the F3 button (flush packages per hygiene flush), the flush occurs
5 times per hygiene flush. If the status LED flashes 5 times after pressing the F4 but-
ton (interval time), the interval time is set to 120 h.
26