Orientation - Kenwood TK-x302 series Bedienungsanleitung

Antenna
Channel selector
Rotate to change the operating channel.
• Channel Annunciation: When changing channels, the
transceiver will announce the newly selected channel number.
(This can be deactivated by your dealer.)
LED indicator
For the LED indicator status, refer to page 9.
Power switch/ Volume control
Turn clockwise to switch the transceiver ON. To switch the
transceiver OFF, turn counterclockwise until a click sounds.
Rotate to adjust the volume level.
PTT (Push to Talk) switch
Press and hold, then speak into the microphone to transmit.
Side 1 key
Press to activate its programmable function, refer to page 7.
Side 2 key
Press to activate its programmable function, refer to page
Speaker/ microphone jacks
Insert the Speaker/ microphone or Headset plug into this
jack.
6

ORIENTATION

Battery pack
7.