Orientation; Led Indicator - Kenwood ProTalk TK-3301 Bedienungsanleitung

Antenna
Channel selector
Rotate to change the operating channel.
• To change the operating frequency or QT/DQT settings of a
channel, refer to "CHANNEL SETUP MODE" on page 11.
• Channel Annunciation: When changing channels, the
transceiver will announce the newly selected channel number.
(This can be deactivated by your dealer.)

LED indicator

For the LED indicator status, refer to page 7.
Power switch/ Volume control
Turn clockwise to switch the transceiver ON. To switch the
transceiver OFF, turn counterclockwise until a click sounds.
Rotate to adjust the volume level.
PTT (Push to Talk) switch
Press and hold, then speak into the microphone to transmit.
6

ORIENTATION

Battery pack