Led Flashing Sequences And Transmission Behaviour - HomeMatic HM-PB-2-WM55 Montage- Und Bedienungsanleitung

( ) triggers the functions OFF, DOWN or DARKER.
Switch actuators and dimmers can then be switched
ON/OFF. Furthermore, dimming occurs by holding the
button pressed and blind actuators move up or down.
7.3 LED flashing sequences and transmission
behaviour
The LED's flashing sequences have different mea-
nings:
Flashing sequence
Min. 2s green LED
2s red LED
Orange flashing
Brief orange flashing and
2s red or green (depen-
ding upon success)
Short orange/short green
flashing
Push button in configura-
tion mode and illuminated
red with button actuation
38
Meaning
Teaching successful
Teaching failed
Only rocker button in
teach mode
Other device in teach
mode and rocker button
put in teach mode
Signal is being send/
confirmed
Push button already
taught for center and is
therefore blocked from
direct teaching