Lock/Unlock Coil In Tc/Tcr-Modes - INNOCIGS ULTEX T80 Bedienungsanleitung

INNOCIGS ULTEX T80 – SELECTING & OPERATING THE MENUS
Display of the recent Hardware/Firmware Version
In the VERSION menu, you can display your current hardware / firmware version.
Press the fire button to leave the VERSION menu.

Lock/Unlock Coil in TC/TCR-Modes

In the COIL menu you can lock or unlock the recent resistance value for the TC/TCR-mode.
Choose the symbol of a closed lock to lock or the symbol of a closed lock to unlock the
resistance value.
Note:
1. This function should only be used at room temperature, to ensure that the correct
"base resistance" is locked.
2. If you accidentally use a conventional coil or coils with a resistance greater than 1.5 ohms in
TC-Ni, TC-Ti, TC-SS or TCR (M1, M2, M3) modes, the device will automatically switch to VW Mode.
68