INNOCIGS CUBIS MAX – USING THE DEVICE
Changing the Cotton
1. Remove the clearomizer from the battery / box mod of your
e-cigarette.
2. Unscrew the cap from the atomizer base, while the mouthpiece
points to the ground.
3. Pull the cotton plate out of the device.
4. Remove the old cotton and insert new one. Please first drip a
few drops of e-liquid on the cotton to make it fully saturated
before first use.
5. Place the cotton plate flush with the notch in the atomizer base
and close it with the cap.
6. Screw the clearomizer back to the battery / box mod.
Please also note the operating instructions on page 45.
47