Using The Device - INNOCIGS ULTEX T80 Bedienungsanleitung

INNOCIGS CUBIS MAX – USING THE DEVICE
Notes on Using the Device for the First Time
Prior to first use, be sure to drip a few drops of your liquid onto the cotton wool that is placed underneath
the heater and leave it in the liquid-filled tank for about 15 minutes after installation. Before putting it into
operation, pull the mouthpiece of your switched-off e-cigarette a few times when the Airflow Control is
wide open. Do not clean the heater with water. If necessary, simply use a dry cloth to wipe it off.
Please make sure that the cotton wool is changed regularly because it is a wearing part.
Note for Cleaning
Use a dry cloth or cotton swab to clean the clearomizer.
Vaping
While holding the fire button of your e-cigarette, inhale the vapor slowly and continuously through the
mouthpiece of your clearomizer. Release the fire button while exhaling the vapor.
45