Locking And Unlocking The Coil Resistance In Vt Mode - INNOCIGS EVIC VTWO MINI SET Bedienungsanleitung

INNOCIGS EVIC VTWO MINI SET – OPERATING & CHANGING THE MODES

1. Locking and unlocking the coil resistance in VT mode

Press the fire button three times to enter the menu. Press the "down" button twice so the second line displaying the
resistance flashes on the display. Press the „up" button to lock or unlock the resistance of the atomizer. When the „lock"
symbol is shown on the display, the resistance is locked.
Note
a) Only lock the resistance when the coil is at room temperature. This will ensure that the correct „base resistance"
of the atomizer coil is locked. The temperature control will remain correct, as long as the coil is not replaced. If the
resistance is locked, you can remove the top cap regardless of whether the atomizer coil is hot or cold.
b) Before changing to another atomizer coil, unlock the resistance. Otherwise, the VT system will not work properly.
In „Resistance Unlock" mode, please make sure that the coil is changed at room temperature to ensure temperature
accuracy.
50