11. Reset the Camera
12. LED Status
LED Activity
Blue ON
Blue flash 5 seconds then OFF
Blue ON
Blue Flash 3 times then OFF
Blue ON then OFF, red stays ON
Red and Blue alternating
Yellow ON
Yellow OFF
Blue and Red ON then OFF
13. Care and Cleaning
• Disconnect the product from the mains before each cleaning.
• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as
they can cause damage to the housing and malfunctioning.
• Clean the product with a dry, fibre-free cloth.
34
• Use the supplied pin or similar tool (like a paperclip)
to reset your camera in case of a malfunction.
• Gently insert into the hole marked Reset (14) and
press.
• The camera will return to factory default settings.
Description
Starting up with microSD card inserted
Starting up without microSD card
Power ON
Continuous record mode ON
Motion detection mode (PIR sensor) ON
Low battery
Charging
Full Charge
Power OFF