C) Motion Detection Mode (Pir Sensor On / Off); D) Low Light Recording - Sygonix 1762522 Bedienungsanleitung

c) Motion Detection Mode (PIR Sensor ON / OFF)

• Press MD (11) button to enter 1 minute test recording.
- The Blue and Red LED indicator will flash and then the Blue LED goes off.
- The Red LED indicator will stay on.
• After the 1 minute test recording,
- The Blue and Red LED indicator flashes 3 times.
- The Red LED indicator will remain on.
The camera will now be in motion detection recording mode. The PIR motion sensor will be
triggered after detecting movement.
• Press MD (11) again to exit motion detection recording mode.
- The Blue and Red LED indicator will flash and then turn off.
- The Red LED indicator will turn off and the device will power off.
If no microSD card is inserted, the blue LED will flash for 3 seconds and then turn off.

d) Low Light Recording

When ambient light levels drop below 20 lux, the camera will automatically switch to low light
recording mode, and the video will be in black and white.
30