Wall Mount; D) Privacy; E) Computer - Usb Connection - Sygonix 1762522 Bedienungsanleitung

• Never short-circuit the contacts of the rechargeable battery. Do not throw the battery or the
product into fire. There is a danger of fire and explosion!
• Never damage the rechargeable battery. Damaging the casing of the rechargeable battery
might cause an explosion or a fire! Unlike conventional batteries/rechargeable batteries (e.g.
AA or AAA type), the casing of the LiPo rechargeable battery does not consist of a thin sheet
but rather a sensitive plastic film only.
• Charge the rechargeable battery regularly, even if you do are not using the product. Due
to the rechargeable battery technology being used, you do not need to discharge the
rechargeable battery first.
• Never charge the rechargeable battery of the product unattended.
• When charging, place the product on a surface that is not heat-sensitive. It is normal that a
certain amount of heat is generated during charging.
c) Wall Mount
• Check that the provided screws are appropriate for the type of surface you intend to attach
them to. If in doubt consult a professional.
• Before drilling, always check for concealed wires or pipes beneath the surface that could be
damaged or cause harm

d) Privacy

• The camera should be used for legal purposes only. Abide by the laws of your country.
• Recording and circulating an image of an individual may constitute an infringement of their
privacy for which you may be held liable.
• Ask for authorization before filming individuals, particularly if you want to keep your recordings
and/or circulate images on the Internet or any other medium.
• Do not circulate a degrading image or one which could undermine the reputation or dignity
of an individual.

e) Computer - USB connection

• This product can be connected to your computer for reading/writing of data via USB port.
• A soon as connected, the battery of the product will be charged.
• If the USB port of your computer you connect to does not restrict power supply, do not
connect the product.
• Alternative methods are described in this instruction manual.
25