Getting Started; A) Remove The Frame Cover; Charging The Battery - Sygonix 1762522 Bedienungsanleitung

8. Getting Started

a) Remove the Frame Cover

• Thread the included ribbon between the frame cover and case as shown.
b) Charging the Battery
• Connect one end of the supplied USB cable to the USB port (13) on the device and the other
end to an available USB port on your computer or USB charger (not included).
• It takes approximately 10 hours to fully charge the battery via 5V/2A charger.
LED
Yellow
OFF
Blue and red flashing
ON
Description
Charging
Fully charged
Low power
OFF
27