Clean The Pre-Ilter - Philips AC4012 Benutzerhandbuch

6 Clean the pre-
filter
Note
•
The pre-ilter is washable and vacuum
cleanable.
•
Clean the pre-ilter for every two weeks to
ensure optimal functioning of the puriier.
1
Switch off the puriier and unplug it.
2
Place your ingers in the recess of the side
panels and gently pull the bottom part of
the front panel towards you (1). Then lift
the hooks at the top of the panel out of
the top of the puriier (2).
2
1
14 EN
3
To remove the pre-ilter, grab the two
projections and pull the ilter towards
you.
4
Use a vacuum cleaner to clean the pre-
ilter or wash it under a running tap. If the
pre-ilter is very dirty, use a soft brush to
brush away the dust.
5
Air dry the pre-ilter.
6
Put the pre-ilter back into the puriier.
Attach all hooks properly to the puriier.