Philips AC4012 Benutzerhandbuch Seite 15

7
To reattach the front panel, insert the top
hooks into the top of the puriier irst (1).
Then, push the panel against the body of
the puriier (2).
1
Note
•
Alternatively, you can clean the pre-ilter by
removing the dust with a vacuum cleaner.
•
Make sure that the pre-ilter is completely dry.
If it is still wet, bacteria may multiply in it and
shorten the lifetime of the pre-ilter.
•
Make sure that the side with the two
projections is pointing towards you, and that all
hooks of the pre-ilter are properly attached
to the puriier.
2
EN 15