Timex 02X-095000 Benutzerhandbuch Seite 2

EXTENDED WARRANTY
Available in U.S. only. Extend your warranty for an additional 4 years from date
of purchase for $5... You can pay with AMEX, Discover, Visa or MasterCard by
calling 1 800-448-4639 during normal business hours... Payment must be made
within 30 days of purchase... Name, address, telephone number, purchase date,
and 5-digit model number required... You can also mail a check for $5 to: Timex
Extended Warranty, P...O... Box 1676, Dept... EF, Little Rock, AR 72203...
Please read instructions carefully to understand how to operate your Timex
watch... Your model may not have all of the features described in this
booklet.
FEATURES AND BASIC OPERATION
1... Date with MM-DD format (month/day)
2... Daily Alarm and Hourly Chime
3... Dual Time (2nd Time Zone)
4... 24-Hour Countdown Timer
5... 24-Hour Stopwatch with Split time
6... INDIGLO night-light
®
SET
MODE
(NEXT STEP)
Button functions shown with setting functions in parentheses
TIME
To set time and date
1... From Time of Day mode, press SET. The Seconds can be seen flashing.
2... Press ST/STP to set Seconds to zero adding one minute if seconds are
"30" or greater...
3... Press MODE to set Hours, as indicated by its flashing. Press ST/STP to
advance the Hours setting... Press and hold to increment quickly...
4... Press INDIGLO to toggle the Hours display between 12-Hour and 24-Hour
format...
Note: 12-Hour time has no indicator in the morning and a "PM" indicator
after Noon... 24-Hour time is indicated by a "24H" on the time display...
Note: Switching between 12- and 24-Hour time can be done by pressing
INDIGLO at any time during the Time Set process...
5... Press MODE to set Minutes, as indicated by its flashing. Press ST/STP to
advance the Minutes setting... Press and hold to increment quickly...
6... Press MODE to set the Year's last two digits, as indicated by its flashing.
Press ST/STP to advance the Year setting... Press and hold to increment
quickly...
7... Press MODE to set the Month number, as indicated by its flashing. Press
ST/STP to advance the Month setting... Press and hold to increment quickly...
8... Press MODE to set the Day, as indicated by its flashing. Press ST/STP to
advance the Day setting... Press and hold to increment quickly...
9... Press SET to exit Time Set...
Note: Based on the Year, Month and Day entries, the watch will display the
corresponding Day of the Week...
ALARM
To turn on/off or to set a Daily alarm, or to turn on/off an hourly chime.
1... Press MODE until "AL" appears...
2... Press INDIGLO repeatedly to turn on/off the Alarm
or both...
3... To Set the Alarm, press SET. The Hour digit flashes and the Alarm ON
lights...
4... Press ST/STP to advance the Hours setting... Press and hold to increment
quickly...
Note: The Hours will be presented in the same format (12- or 24-hour time)
as the time setting...
5... Press MODE to set the Minutes as indicated by its flashing. Press ST/STP
to advance the Minutes setting... Press and hold to increment quickly...
Note: If desired, you can set the Month and/or Day for an alarm... This allows
you to have the alarm sound every day of a month, the same day of every
month, or on a specific date.
®
6... Press MODE to set the Month as indicated by its flashing. Press ST/STP to
advance the Month setting... Press and hold to increment quickly...
7... Press MODE to set the Day as indicated by its flashing. Press ST/STP to
advance the Day setting... Press and hold to increment quickly...
8... Press SET to exit the Alarm Set...
9... When the alarm sounds, press ANY button to silence the alert, or it will stop
automatically in about 10 seconds...
DUAL TIME
To set time for a second time zone
1... Press MODE until "DT" appears...
2... Press SET. The Hours can be seen flashing. Press ST/STP to advance the
Hours setting... Press and hold to increment quickly...
3... Press MODE to set Minutes, as indicated by its flashing. Press ST/STP to
advance the Minutes setting... Press and hold to increment quickly...
ST/STP
4... Press SET to exit Dual Time Set...
(INCREASE VALUE)
Note: The Hours will be presented in the same format (12- or 24-hour time)
as the time setting...
COUNTOWN TIMER
Use this function for timing events or tasks that have a defined end.
INDIGLO
®
1... Press MODE until "TR" appears...
BUTTON
2... To Set the Timer, press SET. The Hour digit flashes.
3... Press ST/STP to advance the Hours setting... Press and hold to increment
quickly...
4... Press MODE to set the Minutes as indicated by its flashing. Press ST/STP
to advance the Minutes setting... Press and hold to increment quickly...
5... Press MODE to set the Seconds as indicated by its flashing. Press ST/STP
to advance the Minutes setting... Press and hold to increment quickly...
6... Press SET to exit Countdown Timer Set...
7... To use the Countdown Timer, press ST/STP to start timing...
8... With the timer running, press ST/STP to pause the timer...
9... With the timer stopped, press ST/STP to re-start it or press INDIGLO to
reset the timer to its originally set duration...
10... When the alert sounds, press ANY button to silence it, or it will stop
automatically in about 10 seconds...
STOPWATCH
Use this function for timing events...
1... Press MODE until "ST" appears...
2... Press ST/STP to start timing...
3... With the stopwatch running, press INDIGLO to record a Split time... The
stopwatch will continue timing in the background...
4... Press INDIGLO to release the display and show the current running
stopwatch time...
5... Press INDIGLO to record another Split time...
6... Press ST/STP to pause the timing...
7... Either press ST/STP to resume timing, or press INDIGLO to reset the
Stopwatch to zero...
Note: If the Stopwatch was paused when the display was showing a Split
time, the first press of INDIGLO will show the final recorded time, and the
second press will reset the Stopwatch to zero...
or the Hourly Chime
SPLIT 1 = 7.11
1
LAP 1 = 7.11 LAP 2 = 7.50
SPLIT 2 = 15.01
ENGLISH 02X-095000
LAP 3 = 7.08 LAP 4 = 7.30
SPLIT 3 = 22.09
SPLIT 4 = 29.39