Aux/Optical Operation; Dab+ Operation - auna Stealthbar-50 Handbuch

Vorschau ausblenden

Inhaltsverzeichnis

Verfügbare Sprachen

• While in the ON mode, press the

the remote control to select AUX or OPTICAL mode.

• Operate your audio device directly for playback features.

• Press the VOL +/– button to adjust the volume to your desired level.

The auto scan will search for the entire DAB+ Band III channels. After the scan has finished, the first alphanumeri-

cally found station will be automatically selected. Note: Full auto scan will not replace the DAB+ stations in me-

mory. If you want to remove all the previously scanned stations, system reset is required.

• In DAB+ mode, first Press the MENU button on the remote control to enter the DAB+ Menu. Then Press the

button to select "FULL SCAN", and then Press the OK button on the remote control to confirm. You

can also press the SCAN button on the remote control to perform a full scan. The display will show "Scan ...".

This may take a few minutes, depending on the number of stations found.

• All the stations that have been found will be stored automatically. To explore the found stations, press the

button and then the OK button on the remote control to confirm.

Secondary Services

• You may see a ">" symbol after the name of the primary station whilst exploring the found stations by pressing

. This indicates that there are secondary services available to that station. These secondary services

contain extra services that are related to the primary station. e.g. a sports station may want to add extra com-

mentaries. The secondary services are inserted directly after the primary station in the station list.

• To select the secondary station, press the

button on the remote control to confirm. When the secondary service ends, the unit will automatically switch

back to the primary station.

Manual Tuning

You can also manually tune the receiver. This can help when aligning your aerial or when adding stations that were

missed while auto tuning.

• Press the MENU button and then

the remote control to confirm.

• Press the

button on the remote control to scroll through the DAB+ frequencies.

• After your desired channel frequency is selected, press the OK button on the remote control to confirm, the

display will now show the frequency.

Presetting Stations

You can store up to 20 of your favourite DAB+ stations to the memory. This will enable you to access your favourite

stations quickly and easily.

• To store a preset, you must first be listening to the station that you would like to save, press the PROG button

on the remote control. The display will show "## Empty", and the preset number will flash.

• Press the

button on the remote control to select your desired station preset number.

• Press the PROG button to confirm your station, the display will show "STORE".