Canon SELPHY CP 790 Benutzerhandbuch Seite 43

Use the (separately sold) Bluetooth Unit BU-30 for wirelessly printing images from Bluetooth enabled
mobile phones. For details on how to use the mobile phone or on printing methods via Bluetooth refer
to the user guide provided with the mobile phone.
1
2
3
Up to approx. 10 m (33 ft.)
During transmission, the blue light on the Bluetooth unit will blink. If transmission is interrupted,

the blinking will cease. Follow the instructions on your mobile phone and try again.
The following conditions could cause slow transmission and printing times or cause transmission

to fail, even within the 10 m range:
- There is an obstacle between the Bluetooth unit and the mobile phone
- There is interference from magnetic fields, static electricity, or radio waves in the area
Choose Canon CP790-XX:XX:XX (X stands for one digit) when choosing a target device name on
your mobile phone.
2
Bluetooth Printing
Make sure that there is no memory
card inserted and that no computer is
connected to SELPHY.
Insert the Bluetooth unit.
Remove the cover attached to BU-30, and insert

it as shown.
Turn on SELPHY.

Transfer images from your mobile phone
to SELPHY.
Bluetooth unit blinks blue during data

transmission.
 Printing starts after data transmission is
completed.
(p. 15)