Storing The Printed Photos - Canon SELPHY CP 790 Benutzerhandbuch

1
2
If dust enters SELPHY and sticks to the paper or color ink, print quality deteriorates.

Storing the Printed Photos

When both sides of a print have perforations, you can remove the edges

by bending them.
Use an oil-based pen to write on prints.

Avoid storing photos in places with high temperatures (40°C/104°F or

higher), places with high humidity or dust, or places subject to direct
sunlight.
Avoid actions that may result in color change, color fading or color

bleeding, such as the following: Sticking any type of adhesive tape on a print surface, allowing print
surfaces to come into contact with vinyl or plastic, applying alcohol or other volatile solvents to a
print surface, leaving print surfaces tightly pressed against other surfaces or objects for prolonged
periods.
If you wish to mount prints in an album, choose an album with photo covers made of nylon,

polypropylene or cellophane.
Color may change over time or depending on storage conditions. Canon assumes no liability for
color changes.
Storing SELPHY
Place SELPHY in the basket.
Make sure the catches are open, then place

SELPHY in the basket.
Take care not to pinch your fingers between

SELPHY and the basket.
Fasten the catch.
Lift the catches and fasten them into place. You

should hear a clicking sound when they lock.
When carrying SELPHY, be sure you have

fastened the catches as instructed above. Carry
SELPHY by using the handle on the basket.
Store SELPHY in a level, dark place where it will

not get dusty.
1