Geonav 4c Bedienungsanleitung Und Installationshinweise Seite 25

Route
The time to arrive to the waypoint
and fuel consumption are dis-
played provided that estimated
speed and fuel consumption val-
ues have been entered (see the
E n t e r i n g s p ee d a n d f u e l c o n s u m p -
t i o n d a t a Section).
To switch to the next page
showing the geographical coor-
dinates of each waypoint, use
the CURSOR key. Go back to the
previous page by using CURSOR
or press the PAGE key to exit.
WP NO.: Waypoint ID
POSITION: Waypoint latitude and longitude
Entering speed and fuel consumption data
This piece of information is used
to calculate the values displayed
in the ROUTE INFO window.
Press the PAGE key to display the
menu, select ROUTE, INFO and
press ENTER.
Enter the data required and con-
firm by pressing ENTER.
English
46
Storing a route in the CompactFlash™
Press the PAGE key to display the
menu, select ROUTE, STORE
and press ENTER. To change the
default name and to confirm the
operation, use the CURSOR key.
The "ROUTE STORED" message
will confirm that the route has
been stored correctly. Once
stored, the route will disappear
from the screen.
Recalling
CompactFlash™
Press the PAGE key to display the
menu, select ROUTE, RECALL
and press ENTER to open the route catalog; select the route by
the CURSOR key and then press ENTER to confirm, or PAGE to
exit.
The route recalled will be displayed, the Autozoom function
automatically enabled and a window will allow selecting the
target waypoint.
Deleting a route
Press the PAGE key to display the menu, select ROUTE, DE-
LETE and press ENTER to confirm.
The catalog that lists the routes stored in the CompactFlash™
will show the CURRENT item indicating the route currently
displayed. Select the route to delete by the CURSOR key, then
press ENTER to confirm.
By selecting CURRENT, the route currently displayed will be
deleted; the route can also be deleted by pressing the CLR key
while in Navigation mode.
a route from the
47
English