Route; Functions In The Route Menu - Geonav 4c Bedienungsanleitung Und Installationshinweise

Route

ROUTE
EDITING A ROUTE (CURSOR MODE)
Creating a waypoint
Using the CURSOR key, move the cursor on the position de-
sired and press ENTER to insert a waypoint.
To enter further waypoints, move the cursor and press ENTER.
The new waypoint will be appended to the existing route.
Up to 20 waypoints per route can be entered by using the
GOTO function as well (see the GO T O Section).
Deleting the last waypoint
Press CLR. If the last waypoint is out of screen, the "DELETE
WP? ENTER = YES" message will be displayed.
Press ENTER to confirm the deletion.
Deleting a waypoint
Use the CURSOR key to position the cursor on the waypoint to
delete and press CLR.
Deleting all waypoints in a route
Press the CLR key repeatedly until the "NO WP PRESENT"
message is displayed.
Moving a waypoint
Position the cursor exactly on the waypoint to move; press
ENTER to capture the waypoint, then move the waypoint to the
position desired and confirm the operation by pressing ENTER.
Inserting a new waypoint in a route
Position the cursor exactly on the route leg to edit and press
ENTER to capture the leg.
Once captured, the leg will show a thicker line to distinguish
English
44
it more easily from the other route legs. A window will also
show the leg captured.
Move the manual cursor to the position desired, insert the
new waypoint and confirm by pressing ENTER.
EDITING A ROUTE (NAVIGATION MODE)
If the manual cursor is displayed, press the PAGE key to enter
Navigation mode.
Changing the target waypoint
Use the "Route to a waypoint" function (see the GO T O Section).
WARNING: The route will be modified and the new target waypoint selected will be
the first waypoint in the route.
Deleting all waypoints
Press the CLR key to show the "DELETE ROUTE? ENTER =
YES" message. Press the ENTER key to confirm the deletion or
another key to exit.

FUNCTIONS IN THE ROUTE MENU

Route Info
Route information is displayed in two pages; the first shows
general route information, whereas the second contains the
geographical coordinates of all waypoints.
Press the PAGE key repeatedly to display the menu bar, select
ROUTE, INFO and then press ENTER.
A window will show the following information:
WP NO.: Waypoint ID
DISTANCE: Distance from START to current waypoint
TIME: Estimated time from START to current waypoint
FUEL: Estimated fuel consumption (liters)
45
English