Geonav 4c Bedienungsanleitung Und Installationshinweise Seite 18

Getting Started
The GEONAV is in Navigation
mode; by pressing the CURSOR
key, it is possible to switch to
Cursor mode (editing mode). The
cursor geographical position is
shown by two windows.
To plot a route starting from the
boat's position, move the cursor
to the position desired, and press
ENTER to insert a waypoint at the
cursor's position, that will be in-
dicated by a circle containing the
number 1.
The windows will show dis-
tance, bearing and the time to
reach the target waypoint.
Press the PAGE key to go back to
Navigation mode.
To add more waypoints, press
CURSOR and repeat the operations
described above.
As new waypoints are added, the
numbering will increase progres-
sively.
In case of error, waypoints can
be deleted by pressing the CLR key
(Cursor mode), starting from the
last entered.
To go back to Navigation mode,
press PAGE.
English
32
If an autopilot is connected to the GEONAV, the plotted route
is automatically followed as soon as the Navigation mode is
enabled.
NOTE: The cursor can be moved to the desired position by using the GOTO function
as well. See the GOTO Section for more details.
33
English