Herunterladen Diese Seite drucken

Peiying PY-GPS5013 Bedienungsanleitung Seite 28

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Owner's manual
9.5 Time & Date
Select "Time" to set up date and time of the device. You may adjust
year, month, day, hour and minute (24 hours format). Tap
to
confirm and exit. Select correct time zone as Time & Date can
be updated automatically while receiving GPS signal from the
satellites.
9.6 System Info
Select "System" to view system information, such as SDRAM,
Flash, Store memory, Version and SN (Serial Number).
9.7 Touch Pen Accuracy Calibration
Select "Co. adjust" to adjust accuracy of touch pen, follow the
instruction to touch the center of the cross with the stylus pen.
9.8 Update Logo
The function is for updating start-up logo of the device. Please be
sure you have stored the Logo pictures in the SD card.
9.9 GPS Path
Select "GPS Path" to setup GPS Map and software path for
navigation. Copy the files to the internal flash memory or put
them on the SD card. Select the path and folder to find the map
executive software (.exe) used, tap the file and tap "GPS Path",
check it and confirm.
9.10 USB
Select "USB" to select different mode while device is being
connected to PC: Mass Storage or ActiveSync.
AV-IN
The device will detect whether there is any video signal from the
EN
AV-IN port automatically. Whenever a video signal is detected, it
will display the video on screen automatically. With this function,
you may install a camera on the rear bumper and enable by
Reverse Gear, connect the camera to the AV-IN jack, it will work
as rear camera when you reverse your car. You may also connect
28

Werbung

loading