Vitek VT-4201 SR Betriebsanweisung Seite 9

–
dry the lid (8), protection screen (7) and sili-
cone gasket thoroughly;
–
place the silicone gasket on the protection
screen (7) and the protection screen (7) - on
the lid (8).
•
Wipe the surface of the heating element (only
when it is cold), do not allow water to get
inside the unit body.
•
Do not immerse the unit body, power cord
and plug into the water or other liquids.
•
Clean the multi-cooker body with a damp
cloth and then wipe dry.
•
Do not use abrasive and aggressive deter-
gents for washing of the unit and accessories.
•
Keep the multi-cooker away from children in
a dry cool place.
TROUBLES AND TROUBLESHOOTING
Failure
The multi-cooker lid can't
be closed.
The pressure in the multi-
cooker has been released,
but the lid can't be opened.
Steam is released from
the lid (8) bottom during
cooking.
Air release through the
blocking system valve (11).
The blocking system valve
(11) does not go up.
Repeated sound signal.
The manufacturer preserves the right to change the specifications of the unit without a preliminary
notification.
Possible Cause
The silicone gasket or pro-
tection screen (7) is installed
improperly.
The blocking system valve is
blocked in the upper position.
The blocking system valve (11)
has not moved to the lower
position.
The silicone gasket is not
installed on the protection
screen (7).
The silicone gasket is very dirty. Clean the silicone gasket.
The silicone gasket is dam-
aged.
The lid (8) is not closed tightly. Close the lid (8) tightly.
The valve is dirty.
The silicone ring of the blocking
system valve is damaged.
The pressure control valve (10)
is installed improperly.
Not enough ingredients or liq-
uid for steam generation.
The multi-cooker is overheated. Unplug the multi-cooker, open the lid
DELIVERY SET
Multi-cooker (with a lid) – 1 pc.
Bowl – 1 pc.
Soup ladle – 1 pc.
Spatula – 1 pc.
Measuring cup – 1 pc.
Instruction manual – 1 pc.
TECHNICAL SPECIFICTAIONS
Power supply: 220-240 V ~ 50/60Hz
Power: 1000-1190 W
Maximal capacity: 6 L
Solution
Remove the protection screen, check
whether the silicone gasket is installed
properly.
Remove the blocking object from the
valve.
Press the valve on the lid handle and
set it down.
Switch the unit off, release the pres-
sure in the multi-cooker, open the
lid. Place the silicone gasket on the
protection screen (7).
Replace the silicone gasket.
Switch off the multi-cooker, remove
the lid and and clean the valve.
Replace the silicone ring of the valve.
Set the pressure control valve to the
position
Follow the recommendations for
amount of products and liquid in the
bowl (6).
and let it cool down.
9
ENGLISH
.