Water Filter; Cup Heater 1; Basic Settings; Overview Of The Basic Settings - Siemens TQ5 serie Gebrauchsanleitung

Overview of the basic settings

Setting
Cleaning and care
1
Cup warmer

Water filter

Coffee temp.
Languages
Autom. switch-off
Water hardness
Key tones
Factory settings
1
Depending on the appliance specifications
2
Factory setting (may vary according to model)

Changing the basic settings

Press ⁠ .
1.
Selection
Milk system
Descale
Clean
calc'nClean
2
Cup warmer off
Cup warmer on
New filter
No filter
normal
high
max.
See options on the appliance.
See options on the appliance.
1 (soft)
2 (medium)
3 (hard)
2
4 (very hard)
Water-softening system
2
Key tones on
Key tones off
Full reset?
Continue: OK
Cancel: ←
2.
a
Description
Start service programme.
→ "Service programmes",
Page 63
Switch cup heater on or off.
→ "Cup heater", Page 58
Set use of the water filter.
Set the temperature for coffee
drinks.
Note: The setting is effective for
all preparation types.
Set menu language.
Changes are immediately dis-
played.
Set how long the appliance
should wait after preparing the
last drink before automatically
switching itself off.
Set the appliance to the local wa-
ter hardness.
→ "Setting the water hardness",
Page 51
Switch the button tones on or off.
Restore settings to the factory
settings.
Note: All individual settings will
be deleted and reset to the fact-
ory settings.
Use or to select the desired
basic setting and press
The display will show the setting op-
tions and the navigation symbols will
light up. The display indicates the
current setting.
Basic settings en
⁠ .
59