Displaying Individual Stored Values; Changing Batteries - boso medicus control Gebrauchsanweisung

Displaying individual stored values

Recall the last measurement stored in the mem-
ory by pressing „M" again after having recalled
the average value. The number of the measure-
ment appears in the display (see illustration 10).
The corresponding measurement value appears after
3 seconds (see illustration 11).
M
M
N 01
Illustration 10
56
M
Illustration 11
Repeated pressing of „M"
will now successively dis-
play all measurements con-
tained in the memory as
described above.
To start a new measure-
ment,
„START".
Systole
mmHg
If no button is pressed, the unit
switches off automatically after
Diastole
5 seconds.
mmHg
when the monitor is switch-
Pulses/min.
ed on can result in loss of
data (see page 43. Change
batteries only when the moni-
tor is switched off).
simply press

Changing batteries