Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GB
D
Slide the cap with the bus wires at the bottom over the bus
terminal (fig. D) until it is heard to engage.
To remove the cap, push sideways and withdraw (fig. E).
34
Cap
E
Technical data
Supply
Power consumption
Connections
24 V supply
and a-b trigger input
instabus EIB
Ethernet / LAN
Serial RS232
e2i (presently not supported)
external
internal
Ambient temperature
Storage temperature
Installation width
Technical specifications subject to change
: 21 – 32 V DC, (e.g. via
unchoked EIB voltage output)
: ca. 3 W without e2i
ca. 6 W with e2i
: screw terminals
2
0.5 –4 mm
single wire or
2
0.34 – 4 mm
stranded wire
without ferrule or
2
0.14– 2.5 mm
stranded wire with
ferrule
: instabus connecting terminal
: RJ45 socket
(10/100 MBit/s Fast Ethernet)
: SUB-D plug, 9-pole
: e2i plug, 4-pole
: e2i strip connector, 6-pole
: -5 °C ... +45 °C
: -25 °C ... +70 °C
: 144 mm (8 modules)
GB
35
Werbung
