Teesa TSA3540 Bedienungsanleitung Seite 23

Owner's manual
blade unit rod when slicing disc is going to be used).
9. Place the lid on the slicer bowl, and rotate to secure in place.
7
10. Remove the slicer connector cover from the main unit.
11. Place the slicer on the main unit and rotate to secure in place (as indicated on the
illustration).
12. CAUTION: Insert food in the feed tube piece by piece using the pusher. Never push it
with a finger or any other kitchen utensil.
10
Notes on using the slicer:
• To remove the food that sticks to the blade or bowl wall, switch off and disconnect the
appliance from power mains first, and then use a spatula.
• If used, always put the blade unit in the bowl before you start to add the ingredients.
• Do not use the slicer to chop very hard ingredients (e.g. coffee beans, turmeric, nutmeg,
ice cubes) as this may cause the blades to get blunt.
• Do not let the appliance run too long when you chop ingredients like cheese or chocolate,
otherwise these ingredients become too hot, start to melt, and turn lumpy.
• The device will not turn on when the lid has not been placed on the slicer, or has been
assembled incorrectly.
• It is suggested to precut ingredients into small pieces before processing them.
• Suggested processing speed:
• Fine disc for shredding: 4
• Coarse disc for shredding: 4
• Disc for slicing: 3
• Rasping insert disc: 4
8
11
9
12
23
EN