Gioteck EX-06 Bedienungsanleitung Seite 11

XBOX SET UP :
1] Connect the HDMI (not included) between the Xbox and TV/Monitor.
2] Connect the AV RCA Adaptor Cable (not included) into the Xbox.
3] Connect the RED/WHITE connectors from the RCA to Audio cable into
4] Connect the the wireless transmitter into an available
5] Connect the audio cable into the wireless transmitter.
6] Turn on your Xbox and make sure that your controller is wirelessly
7] Turn your Headset ON by pressing the Power Button. Pairing with the
8] Make sure that microphone mute is OFF.
9] Go to chat set up.
9
EX6UNI-wireless-manual-book.indb 9
WITH HDMI (OPTION A)
the corresponding inputs of the AV RCA Adaptor Cable (not included).
USB port on the front of your Xbox console.
connected to your console (do not leave the controller charging
or it will transfer electrical noise into your headset).
wireless transmitter should happen automatically. However, if pairing is
unsuccessful, please refer to the Pairing section in 'Getting Started'.
HDMI CABLE
(NOT SUPPLIED)
TV/MONITOR
HDMI INPUT
IMPORTANT: The AV cable supplied with the Xbox 360 does not allow for simultaneous
use with a HDMI cable, as the shape of the AV connector covers the HDMI socket.
You will need to purchase one for this set up method.
HDMI OUTPUT AV MULTI OUT
02
01
AV RCA CABLE
(NOT SUPPLIED)
03
USB PORT
04
05
11/09/2013 10:24