English - Kenwood BL330-Serie Bedienungsanleitung

Use your blender for soups, sauces,
drinks, pâtés, mayonnaise, dressings
etc. Use your mill (if supplied) for
milling herbs, nuts and coffee beans.
safety
Switch off and unplug:
before fitting or removing parts
after use
before cleaning.
Keep hands and utensils out of the
blender when it's on the power unit.
Don't touch the sharp blades.
Don't let children or infirm people
use the machine unsupervised.
Allow hot liquids to cool before
blending – if you haven't fitted the lid
securely and it comes off, you could
get splashed.
Never use a damaged machine. Get
it checked or repaired: see 'service'.
Never use an unauthorised
attachment.
Never leave the machine on
unattended.
Don't let children play with the
machine.
When removing the blender or mill
from the power unit:
wait until the blades have
completely stopped;
don't accidentally unscrew the jug
or jar from the blade unit.
Only use the machine for its
intended domestic use.
before plugging in
Make sure your electricity supply is
the same as the one shown on the
underside of the machine.
This machine complies with
European Economic Community
Directive 89/336/EEC.
before using for the first time
1 Remove all packaging.
2 Wash the parts: see 'cleaning'.

English

Please unfold the front page illustrations
key
blender
filler cap
lid
jug
sealing ring
blade unit
power unit
cord storage
mill (if supplied)
blade unit
sealing ring
jar
sprinkler lid
to use your blender
1 Fit the sealing ring into the blade
unit.
2 Screw the jug onto the blade unit.
3 Put your ingredients into the jug.
4 Put the filler cap in the lid, then turn.
5 Screw the lid onto the jug so that the
thumb tab is over the handle. (To
unscrew the lid, push the thumb tab
.)
6 Place the blender onto the power
unit and turn to lock
7 Switch on.
Important
blender and mill
To ensure long life of your blender,
never run it for longer than 60
seconds or the mill for longer than
30. Switch off as soon as you've got
the right consistency.
Don't process spices – they may
damage the plastic.
The machine won't work if the
blender or mill is fitted incorrectly.
blender only
Don't put dry ingredients into the
blender before switching on. If
necessary, cut them into pieces;
remove the filler cap; then, with the
machine running, drop them through
one by one. Keep your hand over
the opening. Empty regularly.
2
.