Listening To Fm Radio - auna 10026947 Bedienungsanleitung

• Set the radio to FM mode.
The radio will tune to the last station played.
The station name or frequency and scrolling
information text will be displayed.
Automatic Tuning
Searching up the band
• Press SCAN to search up the band for the next station.
Once a station has been found, scanning will stop automatically.
Searching down the band
• Press and hold SCAN to search down the band for the next station.
Once a station has been found, scanning will stop automatically.
Manual Tuning
Press  or  to tune up or down the band in frequency steps of 50kHz.
Press and hold the button to tune larger frequency steps.
RDS (Radio Data System)
Your radio can receive RDS data, broadcast with some FM stations.
When you tune to a station broadcasting RDS data, the station name and information text will be displayed.
FM audio mode
If you can hear a lot of background noise when playing a station, the signal may be weak.
You may be able to improve the signal strength by adjusting the position of the telescopic aerial or moving the radio
to a different position.
If this doesn't help and the noise persists, switching to FM mono reception will reduce the background noise.
• Press ENTER repeatedly to switch between FM Auto and FM Mono modes.
NOTE:- FM mono will not give the spatial sound benefits of FM stereo,
but will always play with less background noise.
Multiplex Name
A multiplex is a collection of radio stations that are bundled and transmitted on one
frequency. There are national and local multiplexes. Local ones contain stations that are
specific to that area.
Multiplex Number and Frequency
The channel and frequency of the present station will be displayed, such as "11C
220.352MHz".
BitRate
The display will show the audio mode and the digital audio bit rate being
received.
Signal Strength
The display will show a slide bar indicating the signal strength: the stronger the signal,
the longer the bar will be from left to right.
Time/Date
The broadcaster (radio station) provides clock and date information automatically
so there's no need to manually set

Listening to FM Radio

18