Basis Operation; Listening To Dab Radio - auna 10026947 Bedienungsanleitung

When the scan finishes, the radio will play the first station in the sequence.
Note: If no stations are found, switch the radio off and move it to a location with a stronger signal. When you
switch the radio back on it will automatically repeat the scan process.
Setting the Clock
The time and date are set automatically from DAB station information
Mode Select
• Press MODE repeatedly to switch between DAB and FM mode.
The mode will be displayed.
Volume Control
• Turn the VOLUME dial to adjust the volume to the level you want.
The volume level will be displayed on a bargraph.
Display Brightness
To conserve power, the display light will dim when set to Standby.If you need to brighten the display at any time when
set to Standby (for example, to check the time at night).
• Press one of the front panel buttons (except STANDBY).The display will brighten for 30 seconds,
then revert to the dim setting.
Set the radio to DAB +mode.
The radio will tune to the last station played.
The station name and scrolling information text will be displayed.

Basis operation

Listening to DAB radio

16