auna 10026947 Bedienungsanleitung Seite 21

The display will indicate if the alarm is set (ON),with the wake up time or not set (OFF)
To change the alarm status:
• Press  or  to step between Alarm ON and Alarm OFF.
• Press ENTER to confirm your choice.
If you selected 'OFF', the alarm will be disabled until you next
switch it on.
If you selected 'ON', the alarm hour digits will flash. You can
now set the alarm time
• Press  or  to set the alarm hour digits to the alarm time you want.
• Press ENTER to confirm your choice.
The alarm minutes digits will now flash.
• Press  or  to set the alarm minutes digits to the alarm time you want.
• Press ENTER to confirm your choice.
You can now choose your preferred alarm type.
Press  or  to step between the wake-up options of Beeper,
DAB or FM.
• Press ENTER to confirm your choice.
The alarm volume setting will now flash
• Press  or  to set the wake-up volume level.
• Press ENTER to confirm your choice.
The alarm mode setting will now flash.
• Press  or  to step between the mode options of Once,
Daily, Weekdays or Weekends.
• Press ENTER to confirm your choice.
The alarm is now set.
When you got to bed
• Set the radio to Standby.
The alarm icon will be displayed in Standby when the
alarm is set to wake you.
When the Alarm Sounds
To stop the alarm sounding:
• Press ALARM/STANDBY to stop the alarm sounding.
To set Snooze mode:
Press any button except ALARM/STANDBY.
When Snooze mode is set the alarm will stop sounding for
the snooze period of 5 minutes and the snooze icon will be displayed.
When the snooze time expires the alarm will sound again.
• You can now set Snooze mode
again or press STANDBY or ALARM
to cancel Snooze mode and switch
the alarm off
21