Installation - B&G H1000 Bedienungsanleitung

electrical connections
DEPTH
SPEED

installation

WARNING: THIS DRAWING IS NOT TO SCALE
Use the Installation instructions and the template provided in unit packaging to install the Interface Box.
RED
NO
CONN.
BLACK
BLUE
WHITE
BLACK
RED
GREEN
WHITE
YELLOW
Drill 4 off holes
(2.9mmØ)for
No.6 x 3/4" self
tapping screws
ORIENTATION
www.bandgservice.co.uk
internal connections
Wire the speed/depth cables into the interface box
as shown in the diagram opposite.
method
To open the connector, carefully push a small flat-
headed terminal screwdriver into the slot directly
above the relevant terminal number.
Push the bare end of the wire into the terminal
connector and withdraw the screwdriver.
113.1mm
BOX BASE OUTLINE